Feed Equipment
DH
Series Dry Polymer Preparation Systems
 The
Dry Polymer Preparation Systems are designed for dependable
operation. Years of field experience with dry polymer preparation,
combined with the knowledge of the leading manufacturer of
water-soluble polymers, is incorporated into every design.
Polymer Wetting Assembly / Dust Control Module
simply uses water to:
• Contain the polymer particles to prevent dust
buildup
• Disperse the powder to prevent agglomerations
• Hydraulically shear the product to begin proper activation
• Transport the solution to the mix tank
Options:
• Allen-Bradley™ PLC and Panelview™ Touchscreen Operator Interface**
• Air compressor if plant air is not available
* Consult your SNF Floquip Representative for system
sizing.
** Allen-Bradley™ PLC and Panelview™ are registered trademarks of
Rockwell Automation.
System Parameters
• 100-300 pounds/day (45-135 kg/day)*
• 0.4-8.34 pounds/minute dry polymer feed rate (0.18-3.8 kg/min)*
Features
• Simple Installation and Operation
• Dust-free Polymer Wetting Assembly
• Solution without formation of agglomerations or "fish-eyes"
• 2.5 cu. ft. Stainless Steel hopper
• Automatic rinse cycle
• Low Water Flow Protection
• Manual and Automatic operation
Utilities
• 70-100 gpm (265-380 L/min), 40-70 psi (2.7-4.8 bar) required
primary dilution water
• 120V, 30A required for preparation unit - Agitator and Transfer
Pumps as required
• 80 psi (5.5 bar), 30 scfm instrument air required - integral air
compressor optional
* Using 48 lbs/cu.ft. and a 0.25% concentration for
high molecular weight, anionic powders. Process capacity is based on
specific tank sizes and age times. Consult your local polymer sales
representative for chemical specifications
|
D |
H |
1 |
C |
0 |
| |
H - Hopper for 50
lb (25 kg) sacks |
1 - (1) Mix tank,
(1) Application tank
2 - (2) Mix/application tanks, (2) agitators |
O - Plant air required
C - Air compressor provided
E - Electric
ball valve |
0 - No rapid fill
required
R- Rapid fill valve |
|
DH
Weight:
561 lb (255 kg)
Dimensions: (L x W x H)
4’ (1220mm)
x 4’ (1220mm)
x 4.4’ (1340mm)
Connections:
Water - 1 1/2” NPT
Solution - 2” NPT |
 |
|
|
Front View |
|
Side View |
|
