| |
|
Paper |
|
|
Solution |
|
Emulsion |
|
Powder |
|
• Primary Clarification |
FL4400 to FL4800 Series |
Plus |
EM533a,
EMA0a |
Or |
AN934a, FA920a |
|
|
FL2250 to FL3249 |
Plus |
EM533a, EMA0a |
Or |
AN934a, FA920a |
|
• Secondary Clarification |
FL4400
to FL4800 Series |
|
EM240 to EM840 |
|
FO4290 to FO4800 |
|
• De-Inking (DAF) |
FL4400
to FL4800 Series |
Plus |
EM533a |
Or |
AN903a,
FA920a |
|
|
FL2250 to FL3249 |
|
EM1540CT to EM640CT
EM240LH to EM640LH
EM240BD to EM640BD |
|
FO4125 to FO4690
FO4198 to FO4698 |
|
• Sludge Dewatering (belt
press) |
FL4400
to FL4800 Series
FL2250 to FL3249 |
|
EM1145
EM1540CT to EM640CT
EM240LH to EM640LH
EM240BD to EM640BD |
|
FO4125 to FO4690
FO4198 to FO4698 |
|
• Sludge Dewatering (screw
press) |
FL4400
to FL4800 Series
FL2250 to FL3249 |
|
EM1145
EM1540CT to EM640CT
EM240LH to EM640LH
EM240BD to EM640BD |
|
FO4125 to FO4690
FO4198 to FO4698 |
|
|
|
a |
These applications use an
anionic or non-ionic, emulsion- or powder-form, flocculant-grade polymer
along with the coagulant-grade product. |
|
b |
These products are available in GRAS versions. |
|
c |
These products are FDA approved under 21CFR173.5 |
|
d |
For centrifuge applications, emulsions can be custom-blended to improve floc stability and drainage. Contact one of our resale managers for
assistance. |
|
e |
Steel mill process and waste waters are typically cationic; so anionic
or non-ionic polymers with pH adjustments will usually provide good
results. |
| |
Cationic polymers should only be needed in rare instances. |
|
